BLAIRS Single vane treated steel sub sewage pump for proficient use. especially productive and solid in fixed establishments with programmed activity with general engine determination and hard-confronted mechanical seal. siphon are exceptionally effectiveness siphons for proficient use & assembled totally in treated steel. They are amazingly solid and appropriate for continuo’s obligation. Single vane impeller is mounted on the finish of the drive shaft and encased in an enormous ring chamber outlined by the siphon body and the base. The pull opening is immediate with the fluid to be siphoned. The pivoting impeller which is centrifuged in the ring chamber communicates motor energy to the water; dynamic energy is changed into pressure energy. The specific state of the impeller streamlines proficiency. Max. Let loose section of Grain size to Ø 50 mm.
BLAIRS single vane submarine sewage pump is intended to deal with messy water for siphoning fluids containing suspended solids, remembering short strands and sewage for homegrown and common applications. It is especially suggested for the exchange of water blended in with mud in zones, for example, homegrown lodging, modern applications and underground vehicle leaves. in an intentionally assembled pit with least measurements 500x500x500 mm is prescribed for fixed establishments to give absolute seepage and to permit right activity of the programmed coast switch.
PERFORMANCE RANGE Flow rate up to 500 I/min. (30m3/h)
Head up to 12 m
OPERATING LIMITS Fluid temperature up to 50 °C
Maximum working profundity 5m beneath water level
Maximum section for Grain size bay Ø 30 mm
STRUCTURAL CHARACTERISTICS Pump body: Stainless steel
Single vane Impeller: Stainless steel.
Motor sleeve: Stainless steel
Motor base: Stainless steel
Motor shaft: Stainless steel.
Mechanical Seal: Double mechanical seal silicon carbide on the siphon side and fixing ring on the engine side (with boundary oil chamber to grease up and cool the fixing surfaces without water).
Designed for persistent obligation, even with the siphon incompletely lowered (min.250mm).
Neoprene H07 RN-F lowered stock cable.
Construction and wellbeing principles in consistence with EN 60 335-1(IEC 335-1, CE61-150) EN 60034-1(IEC 34-1, CEI 2-3).
Type: Con galleggiante with glide switch
Built-in over-burden engine defender with programmed reset is joined in the single stage model.
Permanent split capacitor
Insulation: Sealed acceptance engine with twofold impregnated class F winding (guaranteeing expanded engine life and wide scope of utilization) Protection IP 68
|SVS 75||0.55||0.75||H (m)||9||8||6.5||5||2.5||1|
H= Total Head in Meters
Q= Flow Rate
PERFORMANCE CHART AT n=2900rpm