
The sewage shaper siphon is planned with silicon steel sheet made engine that has been created by utilizing cold moved handling strategy. Copper wire of its engine guarantees its solid activity. This energy proficient engine is likewise outfitted with in constructed security plan that precisely cuts of force supply during overheating condition. Hardened steel shaft of this sewage shaper siphon is against rust treated. Twofold mechanical seal and ergonomic course of this siphoning arrangement ensure about its standard quality. Its control bureau empowers this siphon to recognize the wellspring of spillage. Non obstruct type structure, low upkeep cost, simplicity of establishment, unbending body and space saving plan are its principle characteristics.
Dirty water Pump with Cutter system
Performance Range Flow rate up to 300l/min.[18m/3h]
Head up to12m
Operation Limits
Maximum working profundity 5m beneath water level
Maximum liquid temperature up to 40°C
Maximum entry for suspended solids 10mm
PH worth in water: 4-10
Maximum liquid thickness: 1.2*103Kg/m3
Working Performance V Pumps are sub vortex siphon for filthy water, planned predominantly for homegrown use and mechanical use. Their working rule is that of a divergent siphon with a withdrawn vortex impeller. An enormous size ring chamber with a strung conveyance opening is machined in the siphon body and shut by a cover, lodging the pull opening, which is molded to forestall suspended solids over a specific size from entering the siphon. Since the impeller is withdrawn regarding the cover, water entering the front chamber lying between these two parts accepts a vortex movement and is centrifuged in to the ring chamber leaving the siphon through the conveyance opening.
Pump Installation and Application V siphons are intended to lift filthy water which isn’t synthetically forceful to the siphon segments. In all situations where suspended solids up to 35mm must be managed. Suggested applications in this manner remember depleting flooding for kept regions, for example, storm cellars and carports likewise siphoning homegrown waste and the removal of waste water containing filaments matter and are additionally generally utilized in numerous processing plants. These siphons are not difficult to introduce and trustworthy when utilized naturally in fixed establishments. This framework with glide switch naturally begins the siphon when the liquid arrives at a pressing factor level, halting it once the liquid has been exhausted. Introducing an appropriate non return valve on the conveyance pipe forestalls switch stream when the siphon stops.
Structure Characteristics
Stainless steel: Pump body
Stainless steel: mechanical seal
Stainless steel: shaft
Cast iron impeller with cutter
Model Pump | Power | Q M3/h | 0 | 3 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Single Phase, Three Phase | KW | HP | L/min | 0 | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
V1100D(F) V1100D | 1.1 | 1.5 | H | 7 | 6.7 | 6.2 | 5.4 | 4.3 | 2.8 | / | / | / |
V1300D(F) V1300D | 1.3 | 1.75 | M | 12 | 10.6 | 10 | 8.5 | 6.5 | 4.4 | 2 | / | / |
V1800D(F) V1800D | 1.8 | 2.5 | 10 | 9.5 | 8.8 | 8 | 7 | 5.9 | 4.8 | 3.5 | 2.8 |